Temperature regulation of stainless steel bearings


During the operation of stainless steel bearings, certa […]

During the operation of stainless steel bearings, certain vibrations are inevitably generated. With the extension of the use time, the vibration of the stainless steel bearing is very sensitive to the damage of the bearing, such as peeling, indentation, rust, crack, wear, etc., which will be reflected in the vibration measurement of stainless steel bearings in Hebei. It is generally possible to measure the amount of vibration using a special bearing vibration measuring device.

In fact, in order to ensure the efficient operation of stainless steel bearings, it is necessary to continuously test the operating temperature. Whether measuring the stainless steel bearing itself or other important parts. If the operating conditions are the same, any temperature change can indicate that a fault has occurred.

The frequency measured by the stainless steel bearing manufacturer to infer the specific situation of Hebei stainless steel bearings. The measured values ​​differ depending on the conditions of use of the stainless steel bearings or the mounting position of the sensors. Therefore, it is necessary to analyze and compare the measured values ​​of each machine in advance to determine the judgment standard. At the same time, during the operation of the bearing, its temperature height is also a more important parameter.

Usually the temperature of a stainless steel bearing will gradually increase as its operation begins, reaching a steady state after an hour or two. The normal temperature of a stainless steel bearing will vary with the heat capacity, heat dissipation, speed and load of the machine. If the lubrication and installation parts are suitable, the temperature of the stainless steel bearing will rise sharply, and abnormal high temperature will occur. At this time, it is necessary to stop the operation and take necessary precautions.

In the process of working on stainless steel bearings, we need to pay close attention to the changes in its operating temperature. And when the temperature exceeds the specified value, it will automatically alarm or stop to prevent the burning shaft accident. Generally, the use of high temperature often indicates that the stainless steel bearing is in an abnormal condition.