News

  • Relevant introduction of oil bearing

    Relevant introduction of oil bearing

    Take you to understand what is an oil bearing Oil-impregnated bearings, or Porous Bearings, use metal powder as the main raw material. Oil-impregnated bearings are sintered bodies manufactured by powder metallurgy. They are originally porous and have the ability to adjust the pores more freely durin... read more

    Oct 20,2020 News
  • Lubrication and sealing of bearings for high-speed wire rod mills

    Lubrication and sealing of bearings for high-speed wire rod mills

       Whether the working performance of rolling mill bearings can be effectively used depends on the lubrication to a large extent. Lubricants are called "the fifth largest component of bearings". More than 40% of the damage of rolling mill bearings is caused by poor lubrication. Therefore, to reduce ... read more

    Oct 13,2020 News
  • Understand the types of lower angular contact ball bearings

    Understand the types of lower angular contact ball bearings

     Angular Contact Ball Bearings (AngularContactBallBearings) can simultaneously accept radial load and axial load. Can work at higher speeds. The larger the contact angle, the higher the axial load capacity. The contact angle is the angle between the line of contact points between the ball and the ra... read more

    Oct 10,2020 News
  • A brief introduction to thrust ball bearings in detail

    A brief introduction to thrust ball bearings in detail

      Thrust ball bearings are designed to accept thrust loads during high-speed operation, and are composed of washer-shaped ferrules with ball rolling raceway grooves. Because the ring is in the shape of a cushion, thrust ball bearings are divided into two types: flat base cushion type and self-aligni... read more

    Sep 27,2020 News
  • SKF angular contact ball bearing introduction free combination pairing

    SKF angular contact ball bearing introduction free combination pairing

       Arbitrary matching bearings are specially manufactured, so that when arbitrarily arranged and installed close together, a certain internal clearance or preload and/or uniform load distribution can be obtained without the use of gaskets or similar devices. Any pair of bearings has a model suffix t... read more

    Sep 22,2020 News